12.07.2015 Views

loctite 222 threadlocker - All Fasteners

loctite 222 threadlocker - All Fasteners

loctite 222 threadlocker - All Fasteners

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

MATERIAL SAFETY DATA SHEETSECTION 1.Product Name:IDENTIFICATION OF THE MATERIAL AND SUPPLIERLOCTITE <strong>222</strong> THREADLOCKERProper Shipping Name: None allocated.Other Name(s): LOCTITE <strong>222</strong> SCREW LOCK, SCREW LOCK <strong>222</strong>.Product Code(s): <strong>222</strong>05 (0.5 ml), 231483, 471660, 469052, 231499, 231508, 235933Part Number(s):Use:<strong>222</strong>20(10 ml), 19370 (10 ml), <strong>222</strong>50 (50ml), <strong>222</strong>70 (250ml),Anaerobic sealant.Supplier: HENKEL AUSTRALIA PTY. LIMITED ABN 82 001 302 996TECHNOLOGIES135-141 Canterbury Road, Kilsyth, Victoria, 3137. Tel: (03) 9728 720024 HOUR EMERGENCY CONTACT NUMBER: Tel: 1800 032 379SECTION 2.HAZARDS IDENTIFICATIONSTATEMENT OF HAZARDOUS NATURE:Hazardous according to the criteria of NOHSC. This material has been classified as Harmful (Xn) andIrritant (Xi).Risk phrase(s):R20 Harmful by inhalation.R37/38 Irritating to respiratory system and skin.R41 Risk of serious eye damage.R43 May cause sensitisation by skin contact.Safety phrase(s):S24/25 Avoid contact with skin and eyes.S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.S28 After contact with skin, wash immediately with plenty of soap suds.S37/39 - Wear suitable gloves and eye/face protection.S46 If swallowed, seek medical advice immediately and show this container or label.DANGEROUS GOODS INFORMATION:Not classified as Dangerous Goods according to the criteria of the Australian Code for the Transportof Dangerous Goods by Road and Rail (ADG Code).SUSDP POISON SCHEDULE: None allocated.SECTION 3.COMPOSITION/INFORMATION ON INGREDIENTSINGREDIENTS:CHEMICAL ENTITY CAS NO. PROPORTIONPolyglycol dimethacrylate [25852-47-5] 30-60% w/wPolyglycol oleate [9004-96-0] 30-60% w/wSilica, amorphous, treated [68909-20-6] 5-10% w/wPropylene glycol [57-55-6] 1-5% w/wCumene hydroperoxide [80-15-9] 1-5% w/wOther ingredients determined not to be hazardous to 100%DATE OF MSDS: 02.11.05 REVISION OF: July 2001 IDH NO: -Page 1 of 4 PROPRIETARY PRODUCT: LOCTITE <strong>222</strong> THREAD LOCKER


MATERIAL SAFETY DATA SHEETSECTION 4.Ingestion:Skin:Eyes:Inhalation:FIRST AID MEASURESIf swallowed, do not induce vomiting. For advice, contact a Poisons InformationCentre (Phone 13 11 26) or a doctor.Remove contaminated clothing and wash affected areas with plenty of water. Ifirritation, redness or blistering occurs, seek medical attention.Hold eyes open and flush with water for at least 15 minutes. If irritation develops,seek medical attention.If inhaled, remove from contaminated area. For all but the most minorsymptoms, arrange for patient to be seen by a doctor.Advice to doctor: Treat symptomatically.First Aid facilities: Eye wash and normal washroom facilities.SECTION 5.FIRE FIGHTING MEASURESSuitable extinguishing media: Use foam, dry chemical or carbon dioxide.Hazards from combustion products: In a fire, it will burn. Under fire conditions, it can releaseoxides of carbon, oxides of nitrogen and noxious fumes.Precautions for fire fighters and special protective equipment: If there is a risk of exposure toproducts of combustion, fire-fighters should wear self-contained breathing apparatus.SECTION 6.ACCIDENTAL RELEASE MEASURESWear protective gloves, chemical goggles and safety boots. For small spills, wipe up residue with acloth. For large spills, contain and collect spillage with inert absorbent materials (e.g. sand, earth,vermiculite). Transfer to sealable containers suitable for storing spilled material. Flush areas incontact with material with adequate warm soapy water to render the area safe for human contact.Note: Residues are slightly water soluble. Do not contaminate watercourse. Dispose of solid residuesin waste disposal area in accordance with relevant State and Federal requirements.SECTION 7.HANDLING AND STORAGESafe Handling: Observe recommendations made under SECTION 8. EXPOSURECONTROLS/PERSONAL PROTECTION. Use in a well ventilated area. Avoid breathing vapour.Storage: Store indoors in a cool, dry and well ventilated area. Keep containers sealed when not inuse. Store in original containers away from heat, sparks and open flames. Store at or below 38°C.SECTION 8.EXPOSURE CONTROLS / PERSONAL PROTECTIONNational exposure standards: TWA: 10mg/m³ as propylene glycol.Engineering controls:None required under normal conditions of use, but if vapour or mistis being generated, use a local mechanical exhaust system.Personal protective equipment: Avoid contact with skin and eyes. Wear neoprene or butyl rubbergloves and safety glasses with side shields. Use with adequate ventilation. If inhalation risk exists,wear a respirator complying with the requirements of AS 1715 and AS 1716.SECTION 9.PHYSICAL AND CHEMICAL PROPERTIESDATE OF MSDS: 02.11.05 REVISION OF: July 2001 IDH NO: -Page 2 of 4 PROPRIETARY PRODUCT: LOCTITE <strong>222</strong> THREAD LOCKER


MATERIAL SAFETY DATA SHEETPhysical data:Appearance:Pink liquid.Specific gravity: 1.08 @ 20ºCSolubility:Slightly soluble in waterFlash point (PMCC): > 90°COdour:MildSECTION 10.STABILITY AND REACTIVITYChemical stability: Stable under normal conditions of temperature and pressure.Conditions to avoid: Open flames, sparks, strong heat.Incompatible materials: Keep away from strong oxidising agents, acids and alkalies. This product isdestabilised by strong reducing agents.Hazardous decomposition products: Combustible liquid. In a fire, it can release oxides of carbon,oxides of nitrogen and noxious fumes.Hazardous reactions: Hazardous polymerisation will not occur.SECTION 11.TOXICOLOGICAL INFORMATIONHEALTH EFFECTS:Acute:Ingestion:Skin:Eyes:Inhalation:Chronic:If swallowed, may cause gastrointestinal irritation.Irritating to skin. May cause sensitisation by skin contact.Contact with the eyes can cause severe irritation.Inhalation of vapours may cause respiratory irritation.Repeated or prolonged skin contact may cause dermatitis.Toxicity information: None available for this product.SECTION 12.ECOLOGICAL INFORMATIONDo not allow product to contaminate waterways or soil. This product may be harmful to aquaticorganisms.SECTION 13.DISPOSAL CONSIDERATIONSKeep unwanted material in sealed containers for disposal via chemical waste collections. Containersshould be emptied prior to disposal at approved landfill site.SECTION 14.TRANSPORT INFORMATIONNot classified as Dangerous Goods according to the criteria of the Australian Code for the Transportof Dangerous Goods by Road and Rail (ADG Code).SECTION 15.REGULATORY INFORMATIONSUSDP POISON SCHEDULE: None allocatedDATE OF MSDS: 02.11.05 REVISION OF: July 2001 IDH NO: -Page 3 of 4 PROPRIETARY PRODUCT: LOCTITE <strong>222</strong> THREAD LOCKER


MATERIAL SAFETY DATA SHEETSECTION 16.OTHER INFORMATIONAbbreviations/acronyms:NOHSC - National Occupational Health and Safety CommissionSUSDP - Standard for the Uniform Scheduling of Drugs and PoisonsTWA – Time-weighted averageDISCLAIMER:The percentage weight (% w/w) of ingredients is not to be taken as a specification guaranteed byHenkel Australia Pty. Limited, but only as an approximate guide to the content of hazardousingredients in the material. The information contained herein does not constitute a guarantee byHenkel Australia Pty. Limited concerning the properties of the material.The information contained in this Material Safety Data Sheet is offered in good faith and has beendeveloped from what is believed to be accurate and reliable sources. The information is offeredwithout warranty, representation, inducement or licence and Henkel Australia Pty. Limited assumesno legal responsibility for reliance upon same. Henkel Australia Pty. Limited disclaims any liability forloss, injury or damage incurred in connection with the use of the material or its associated MaterialSafety Data Sheet.This information is not to be construed as a representation that the material is suitable for anyparticular purpose or use except those conditions and warranties implied by either Commonwealth orState statutes. Customers are encouraged to make their own enquiries as to the material'scharacteristics and, where appropriate, to conduct their own tests in the specific context of thematerial's intended use.DATE OF MSDS: 02.11.05 REVISION OF: July 2001 IDH NO: -Page 4 of 4 PROPRIETARY PRODUCT: LOCTITE <strong>222</strong> THREAD LOCKER

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!